Table of Contents
Advertisement
Reference [Rhythm]
●
To change an event setting
Display the event you want to change, and turn the dial to
alter the setting.
●
To delete event information
Display the event you want to delete, and press the
[FUNCTION] key twice. The indication "Event Erase""
appears. Press the [ENTER] key.
8.
When you have finished, press the STOP [
key.
The REC [O] key goes out, and the rhythm song selection
screen appears again. To return to the main screen, press the
[EXIT] key.
Playing a rhythm song
This section explains how to play one of the 10 rhythm songs
that were created by inputting rhythm pattern and chord
information.
1.
From the main screen, hold down the [SHIFT]
key and press pad 8 (SONG) so that the pad
lights up.
The rhythm song selection screen appears.
SNG 1 SONG001
SNG 1 SONG001
2.
Turn the dial to select the rhythm song to
play, and press the PLAY [
The rhythm song will begin playing. If something also has been
recorded on the audio tracks, those tracks will also play back. The
display shows information about the rhythm pattern number,
chord type, and other information at the current location.
SNG 1 SONG001
SNG 1 SONG001
7sus4 001-01-00
7sus4 001-01-00
Current chord
3.
To stop the rhythm song, press the STOP [
key.
4.
To return to the main screen, press the [EXIT]
key.
HINT
It is also possible to play a drum kit or bass program by hitting
the pads during rhythm song playback.
108
001-01-00
001-01-00
R
] key.
Rhythm song name
Editing a rhythm song
This section explains how to edit a rhythm song that you have
created.
Copying a specified range of
measures
P
]
Part of a rhythm song can be copied in measures and inserted
into another location. This is convenient when you want to
repeat a portion of a rhythm song.
1
2
3
PATTERN A
PATTERN A PATTERN A
1
2
3
PATTERN A PATTERN B
1
2
3
PATTERN A PATTERN B
1
2
3
PATTERN A PATTERN B PATTERN A PATTERN B
1.
From the main screen, hold down the [SHIFT]
key and press pad 8 (SONG) so that the pad
lights up.
The rhythm song selection screen appears.
2.
Turn the dial to select the rhythm song edit.
3.
Press the REC [
4.
Repeatedly press the [FUNCTION] key to
bring up the indication "Copy Start" on the
display.
Copy
Copy
Start 001-01-00
Start 001-01-00
P
]
5.
Turn the dial to select the copy source start
measure, and press the [ENTER] key.
The display indication changes as follows, letting you specify
the copy source end point.
Copy
4
5
6
7
8
PATTERN B
4
5
6
7
8
PATTERN A PATTERN A
Copy
4
4
5
6
7
8
O
] key.
Copy source start point
ZOOM HD8/HD16
9
10
PATTERN B
Advertisement
Table of Contents
