Table of Contents
Advertisement
Synthesizer or sampler etc.
Guitar
(1)
Bass
(6)
<<
only>> The STEREO SUB-OUT jack normally carries the same signal as the MASTER OUT
connectors. (You can therefore also use it as a second headphone jack.) By changing an internal setting, the jack
can be made to carry a mix that is separate from MASTER OUT, with level/pan adjustments for each track/input,
allowing use as a monitor send or effect send. The output level can be adjusted with the knob below the jack.
The DIGITAL OUT connector carries the same
(7)
signal as the MASTER OUT connectors, but in
digital format (16-bit/44.1 kHz).
Digital recorder (MD recorder or
DAT recorder or similar)
Rear panel
(8)
By connecting the MIDI IN/OUT connectors to another
MIDI device (or a computer with MIDI interface), you can
exchange MIDI information between the HD8/HD16 and
the other device.
If you connect the HD8/HD16 to a computer via the USB
port, you can exchange audio files and MIDI information
between the HD8/HD16 and the other device.
If a computer is connected via the MIDI IN/OUT connectors
or the USB port, the HD8/HD16 can be used as a control
surface for DAW software.
(9)
Loop the cable of the AC adapter around the hook as
shown in the diagram before connecting it to the DC 12V
jack. This will prevent the plug from being pulled out if the
AC adaptor cable is accidentally pulled.
ZOOM HD8/HD16
L
R
Dynamic or condenser
microphone
(2)
(3)
(10)
(11)
Expression pedal
OPTICAL
(ZOOM FP-01/FP-02)
IN
(7)
(4)
Monitor system (audio components or
amplified speakers etc.)
(6)
(5)
You can connect the separately available foot pedal
ZOOM FP-01/FP-02 to this jack, for adjusting the effect
parameter value.
You can connect the separately available foot switch
ZOOM FS-01 to this jack, for playback start/stop
control or for punch-in/punch-out control.
(10)
(8)
MIDI
MIDI
IN
OUT
MIDI
interface
Computer
Connections
Headphones
Headphones
Headphone amplifier
Headphones
Foot switch
(11)
(ZOOM FS-01)
AC adapter
(9)
17
Advertisement
Table of Contents
