Reversing A Specified Range Of Audio Data - Zoom HD16 Operation Manual

Reference [Track Editing]
3.
Press the [ENTER] key.
The second line of the display now lets you specify the fade-
in/fade-out end point.
Start 000:00:000 Start 000:00:000
End End 000:10:000 000:10:000
4.
Use the same procedure as in step 2 to
specify the fade-in/fade-out end point.
If you press the PLAY [R] key at this point, the specified
range will be played.
5.
Press the [ENTER] key.
A display for selecting the fade-in or fade-out curve appears.
Fade Curve Fade Curve
In-1 In-1
6.
Turn the dial to select the fade-in or fade-out
curve.
Curves In-1 to In-3 are for fade-in, and curves Out-1 to Out-3
are for fade-out. The numbers are for three different kinds of
curves, which look as follows.
Fade-in
In-1
Fade-out
Out-1
7.
Press the [ENTER] key.
The indication "Fade?" appears on the second line of the
display.
8.
To execute the fade-in or fade-out operation,
press the [ENTER] key.
When the fade-in/fade-out operation is completed, the unit
returns to the track edit menu.
By pressing the [EXIT] key instead of the [ENTER] key, you
can cancel the operation and back up one step at a time.
54
In-2 In-3
Out-2 Out-3
Reversing a specified range of
audio data
You can reverse the order of a specified range of audio data.
Reverse
A B C D E
1.
Refer to steps 1 – 6 of "Basic steps for range
editing" and select the REVERSE command.
Select the track/V-take for reversing, and
press the [ENTER] key.
The display for specifying the reverse start point appears. (For
information on switching the display units, see page 51.)
Start 000:00:000 Start 000:00:000
2.
Use the cursor left/right keys to move the
flashing section of the counter, and turn the
dial to specify the reverse start point.
3.
Press the [ENTER] key.
The second line of the display now lets you specify the reverse
end point.
Start 001:15:000 Start 001:15:000
End End 001:18:000 001:18:000
4.
Use the same procedure as in step 2 to
specify the reverse end point.
If you press the PLAY [R] key at this point, the specified
range will be played.
5.
Press the [ENTER] key.
The indication "Reverse?" appears on the second line of the
display.
6.
To execute the reverse operation, press the
[ENTER] key.
When the reverse operation is completed, the unit returns to the
track edit menu.
By pressing the [EXIT] key instead of the [ENTER] key, you
can cancel the operation and back up one step at a time.
E D C B A
ZOOM HD8/HD16