Table of Contents
Advertisement
HINT
If the indication "Empty" appears instead of the patch name, all
modules for the patch are set to Off. By editing such a patch,
you can create your own settings from scratch.
3.
Press the [EDIT] key.
The first line of the display shows the currently selected effect
module. This means that the patch can now be edited.
Effect module
COMP/LIMITER
COMP/LIMITER
Compressor
Compressor
4.
Use the cursor left/right keys to select the
effect module to edit.
MOD/DELAY
MOD/DELAY
Chorus
Chorus
The indication shown on the first line for the various effect
modules changes as shown in the table below.
The table applies to the case when the effect module is On.
When the effect module is Off, the indication "Off" appears on
the second line of the display.
HINT
• To edit the ZNR/VOLUME PEDAL module, bring up the
indication "TOTAL" on the first line of the display.
• In the DUAL MIC algorithm, the modules assigned to the L and
R channels can be edited separately. The indication "L" on the
first line of the display means that the module for the left channel
is selected. The indication "R" means that the module for the
right channel is selected.
Algorithm
CLEAN
COMP/LIMITER
COMP/LIMITER
DISTORTION
ACO/BASS SIM
COMP/LIMITER
BASS
COMP/LIMITER
COMP/LIMITER
MIC
COMP/LIMITER
COMP/LIMITER L
COMP/LIMITER L
DUAL MIC
COMP/LIMITER
COMP/LIMITER
COMP/LIMITER
LINE
COMP/LIMITER
HPF1
HPF1
8 x COMP EQ
COMP/Lo-Fi
COMP/Lo-Fi
MASTERING
MULTIBAND
COMP/Lo-Fi
ZOOM HD8/HD16
Module indication
EFX
EFX
PREAMP
PREAMP
EFX
PREAMP
EFX
EFX
MIC PRE
MIC PRE
MICPRE +
EFX
DE-ESSER
MIC PRE L
MIC PRE L
MICPRE
ISOLATOR
ISOLATOR
ISOLATOR
HPF2
HPF2
NORMALIZER
NORMALIZER
NORMALIZER
• <<
only>> In the 8x COMP EQ algorithm, there is one
high-pass filter/compressor/EQ per channel. You can control the
respective effect on/off settings separately. The number of the
channel that is currently being set appears on the first line of the
display.
NOTE
<<
only>> The 8xCOMP EQ algorithm does not include
the ZNR module.
5.
To change the effect type of the currently
selected effect module, turn the dial.
For effect modules which comprise multiple effect types, the
name of the currently selected effect type is shown on the
second line of the display. When you turn the dial in this
condition, the effect type changes.
If the contents of a patch have been changed, the [
symbol will appear on the first line of the display.
MOD/DELAY
MOD/DELAY
Ensemble
Ensemble
Effect type name
6.
Use the cursor up/down keys to select the
effect parameter that you want to edit.
The displayed parameter depends on the effect module and
effect type.
The following illustration shows an example of what appears
on the display when you have selected the "Depth" parameter
of the "Ensemble" effect.
3BAND EQ
3BAND EQ
MOD/DELAY
MOD/DELAY
3BAND EQ
MODULATION/DELAY
3BAND EQ
3BAND EQ
MOD/DELAY
MOD/DELAY
3BAND EQ
MODULATION/DELAY
3BAND EQ L
3BAND EQ L
DELAY L
DELAY L
3BAND EQ
3BAND EQ
3BAND EQ
MOD/DELAY
MOD/DELAY
3BAND EQ
MODULATION/DELAY
HPF8
HPF8
3BAND EQ
3BAND EQ
DIMENSION/RESO
DIMENSION/RESO
3BAND EQ
DIMENSION/RESONANCE
Reference [Effects]
t t
] "Edited"
t
t
E symbol
TOTAL
TOTAL
ZNR, VOLUME PEDAL,
PATCH LEVEL
TOTAL
TOTAL
ZNR, VOLUME PEDAL,
PATCH LEVEL
TOTAL
TOTAL
ZNR, VOLUME PEDAL,
DELAY
PATCH LEVEL
TOTAL
TOTAL
ZNR, VOLUME PEDAL,
PATCH LEVEL
TOTAL
TOTAL
VOLUME PEDAL,
PATCH LEVEL
TOTAL
TOTAL
ZNR, VOLUME PEDAL,
PATCH LEVEL
131
Advertisement
Table of Contents
