Securing The Bus Bar To The Backplane Studs With Hex Nuts (S3 Chassis/S-Poe-4Bay-Pwr Example) - Enterasys S-Series Upgrade Installation Manual

Installing the PoE Subsystem and the Bus Bar
10. Secure the bus bar to the backplane studs with the hex nuts provided in the upgrade kit. See
Figure
Figure 2-15
POE-4BAY-PWR Example)
2-16 Installing the PoE Upgrade Kit
2‐15.
Securing the Bus Bar to the Backplane Studs with Hex Nuts (S3 Chassis/S-
Note: Torque the hex nuts to 9 inch pounds.