installation
Log Set Installation
Read the instructions below carefully and refer to the images.
Dangerous operating conditions may occur if the logs are not
positioned in their correct locations. If the logs are broken
do not use the unit until they are replaced. Broken logs can
interfere with the pilot operation.
Log kit (Part # 536-930) contains the following pieces:
a)
2-711
Rear Log
b)
2-712
Center Log
c)
2-713
Left Log
d)
2-714
Front Log
e)
2-715
Top Left Log
f)
2-716
Top Right Log
g)
Embers
h)
946-669
Platinum Embers
2-711
2-713
1) Carefully remove the logs from the box and unwrap them. The logs
are fragile, handle with care - do not force into position.
2) Fit log 2-711 into the pins on the rear log tray.
2-711
|
26
Liberty
L234-11 Direct Vent Gas Insert
®
918-674a
LOG SET INSTALLATION
(supplied with packaged manual)
(supplied with packaged manual)
2-716
2-715
2-712
3) Place log 2-714 on the base of the fi rebox in front of the burner.
2-714
4) Fit log 2-712 into the pins on the middle of the burner.
1
2-711
2-714
2-712
L234
01/03/08