Saving Seam Appearance Sequences - DURKOPP ADLER 512/532 Operating Instructions Manual

40

4.15 Saving seam appearance sequences

In addition to the seam appearances stored in memory locations
P1 ~ P50, the sewing machine also allows the use of seam
appearances stored in memory locations C01 ~ C25.
Prerequisite:
• Machine is in programming mode, Ready button LED is off.
To save seam appearance sequences:
1. Press the Memory button and button P3 at the same time.
2. Press the +/– Program buttons to select a memory location
(C01 ~ C25).
3. Press the Ready button to save the seam appearance
sequence.
4. Press the +/– Function buttons to sew the 1
rance.
5. Press the +/– Function buttons to sew the 2nd seam appe-
arance.
6. Press the +/– Function buttons to sew the 3rd seam appea-
rance.
7. Press the +/– Function buttons to sew the 4th seam appea-
rance.
8. Press the Ready button to confirm the seam appearance
sequence.
 The Program shows the memory location, the Function
display shows the number of seam appearances.
9. Press the Memory button to exit the memory mode.
Operating Instructions 512/532 - 05.0 - 04/2018
Programming
st
seam appea-