Hyundai i10 Owner's Manual page 462

Maintenance
  Type A Type A
  Type B Type B
[1] : Headlight
4. Disconnect the headlight bulb
socket-connector.
5. Unsnap the headlight bulb retain-
ing wire by depressing the end and
pushing it upward.
6. Remove the bulb from the head-
light assembly.
7. Install a new headlight bulb and
snap the headlight bulb retaining
wire into position by aligning the
wire with the groove on the bulb.
8. Connect the headlight bulb socket
connector.
9. Install the headlight bulb cover by
turning it clockwise.
10. Install the wheel guard in the re-
verse order.
8-66
i
Bi-Function projection headlight
This headlight is bi-function type that
switches the low beam to high or the
high beam to low using solenoid sys-
tem. So, the moving sound may be
heard when the headlight switches the
low beam to high or the high beam to
low and it does not indicate malfunc-
OAC3089045TU OAC3089045TU
tion of the headlight.
  Type A Type A
OAC3089051TU OAC3089051TU
  Type B Type B
[2] : Low Beam Assist-Static Light
[3] : Turn signal light
Turn signal light, Low Beam
Assist-Static Light
1. Open the hood.
2. Remove the turn signal light or low
beam assist-static light bulb cover
by turning it counterclockwise.
Information
OAC3089035TU OAC3089035TU
OAC3089036TU OAC3089036TU