System Setting And Activation; Display - Hyundai i10 Owner's Manual

System setting and activation

System setting
• The driver can activate the Speed
Limit Warning by selecting 'User
Settings → Driver Assistance →
Driving Assist → Speed Limit
Warning.
• When ISLW is activated, the sym-
bols appear on the instrument
cluster to display the speed limit
information and overtaking restric-
tion.
• When ISLW is activated in the nav-
igation setting, the above informa-
tion and the restriction are also dis-
played on the navigation.
System activation
• ISLW displays the speed limit
information and alerts the overtak-
ing restriction, when your vehicle
passes by the relevant traffic signs.
• ISLW displays the previous speed
limit information, right after the
ignition switch is placed to the ON
position.
• You may find different speed limit
information for the same road. The
information is displayed depending
on the driving situations. Because,
traffic signs with additional sign
(e.g. rainy, arrow, etc.) are also
detected and compared with vehi-
cle internal data (e.g. wiper opera-
tion, turn signal, etc.).
i
Information
The speed limit information on the
instrument cluster may differ from the
one on the navigation. In this case,
check the speed unit setting on the nav-
igation.

Display

Display in the bottom of the
cluster
The cluster displays the speed limit
information, overtaking
and conditional road sign.
Conditional road sign
If ISLW detects a conditional road
sign, the symbol of road sign is over-
lapped at the bottom or left of the
speed limit on the cluster.
There may be signs with different
speed limits on the same road. For
example, normally, the speed limit is
120 km/h (75 mph), however the
speed limit is 90 km/h (55 mph) when
it is raining or snowing.
The conditional road sign means that
you observe the speed limit and over-
taking prohibition on certain condi-
tions, such as when rain or snow.
06
OTM048177L
restriction
OTM048178L
6-73