To Deactivate The Isg System; Isg System Malfunction - Hyundai i10 Owner's Manual

Hide thumbs Also See for i10:
Table of Contents

Advertisement

Automated Manual Transmission
vehicle
When the shift lever is shifted from N
(Neutral) to R (Reverse), D (Drive) or
Manual shift mode without the brake
pedal depressed. A message "Press
brake pedal before driving on" will
appear on the LCD display. To acti-
vate auto start, depress the brake
pedal.

To deactivate the ISG system

• Press the ISG OFF button to deac-
tivate the ISG system. Then, the
ISG OFF button indicator illumi-
nates, and the message "Auto
Stop System Off" appears on the
LCD display.
• Press the ISG OFF button again to
reactivate the ISG system. Then,
the ISG OFF button indicator turns
OFF.

ISG system malfunction

The ISG system may not operate:
When there is a malfunction with the
ISG sensors or the ISG system.
The followings occur, when there is
a malfunction with the ISG system:
• The auto stop indicator (
blink in yellow on the instrument
OAC3069020TU
cluster.
• The light on the ISG OFF button
will illuminate.
i
• When you cannot turn OFF the ISG
OFF button indicator by pressing
the ISG OFF button, or when the
malfunction with the ISG system
persists, we recommend that you
contact an authorized HYUNDAI
dealer.
• You can turn off the ISG OFF but-
ton indicator by driving over 80
km/h (50 mph) for up to 2 hours
with the fan speed below the 2nd
position. If the ISG OFF button
indicator remains ON, we recom-
mend that you contact an autho-
rized HYUNDAI dealer.
When the engine is in auto stop
mode, the engine may restart.
Before leaving the vehicle or
checking the engine compartment,
stop the engine by placing the igni-
tion switch to the LOCK/OFF posi-
tion or removing the ignition key.
Information
WARNING
06
) will
6-47

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents