Hyundai i10 Owner's Manual page 450

Maintenance
NOTICE
After checking the fuse panel in
the engine compartment, securely
install the fuse panel cover. You
may hear a clicking sound if the
cover is securely latched. If it is
not securely latched, electrical fail-
ure may occur from water contact.
8-54
Multi fuse (Main fuse)
If the multi fuse is blown, it must be
removed as follows:
1. Turn the vehicle off.
2. Disconnect the negative battery
cable.
3. Remove the fuse panel cover by
pressing the tab and pulling it up.
4. Remove the nuts shown in the pic-
ture above.
5. Replace the fuse with a new one of
the same rating.
6. Reinstall in the reverse order of re-
moval.
If the multi fuse is blown, we recom-
mend that you consult an authorized
HYUNDAI dealer.
OAC3089018TU OAC3089018TU