Hyundai i10 Owner's Manual page 341

i
Information
First, switch the mode to Cruise
Control by pressing the
if equipped with the Speed Limit
Control System.
The mode changes, as below, whenever
the button is pressed.
System off
Speed Limit Control
3. Push the toggle switch down (SET-),
and release it. The SET indicator
light will illuminate.
4. Release the accelerator pedal.
OAI3069010
button
Cruise Control
OAI3069011
i
Information
The vehicle may slow down or speed
up slightly while going uphill or down-
hill.
To increase Cruise Control
speed
• Push the toggle switch up (RES+)
and hold it, your vehicle set speed
will increase by 10 km/h (5 mph).
Release the toggle switch when
the desired speed is shown and
the vehicle will accelerate to that
speed.
• Push the toggle switch up (RES+)
and release it immediately. The
cruising speed will increase 1.0
km/h (1.0 mph) each time the tog-
gle switch is operated in this man-
ner.
• Depress the accelerator pedal.
When the vehicle attains the
desired speed, push the toggle
switch down (SET-).
06
OAI3069012
6-85