Hyundai i10 Owner's Manual page 276

While driving
• When you turn the engine on and
off, you may hear clicking sounds
as the system goes through a self-
test. This is a normal sound for the
Automated Manual Transmission
(AMT).
• During the first 1,500 km (1,000
miles), you may feel that the vehi-
cle may not be smooth when accel-
erating at low speed. During this
break-in period, the shift quality
and performance of your new vehi-
cle is continuously optimized.
i
Information
Creeping function
The Creeping function helps the vehi-
cle to start smoothly. If you take your
foot off the brake pedal when the shift
lever is either in R (Reverse), D (Drive)
or M (Manual) position, the vehicle
will start slowly without depressing the
accelerator pedal. To disable the func-
tion, depress the brake pedal or pull up
the parking brake lever.
The creeping function will not operate
when:
• The parking brake lever is engaged
with the shift lever in R (Reverse), D
(Drive) or M (Manual) position
6-20
Automated Manual Transmission
(AMT) instruction label
Read and follow the instruction label
attached on the driver side's sunvisor
before driving the vehicle.
OAH2038024