Hyundai i10 Owner's Manual page 251

To reject the call, press the [2 SHFL]
button on the control panel.
• Alternatively, press the Call end
button on the steering wheel.
NOTICE
• Depending on the mobile phone
type, call rejection may not be
supported.
• Once your mobile phone is con-
nected to the system, the call
sound may be output through the
vehicle's speakers even after you
exit the vehicle if the phone is
within the connection range. To
end the connection, disconnect
the device from the system or
deactivate Bluetooth
device.
Using options during a call
During a call, you will see the call
screen shown below. Press a button
to perform the function you want.
To switch the call to your mobile
phone, press the [1 RPT] button on
the control panel.
• Alternatively, press and hold the
Call/Answer button on the steering
wheel.
To end the call, press the [2 SHFL]
button on the control panel.
• Alternatively, press the Call end
button on the steering wheel.
• Press the [MENU/CLOCK] button
on the control panel to access the
following a menu option:
• Microphone Volume (Outgoing
Volume): Adjust the microphone
volume or turn off the microphone
so the other party cannot hear you.
NOTICE
• If the caller information is saved
in your contacts list, the caller's
name and phone number will be
displayed. If the caller informa-
on the
tion is not saved in your contacts
list, only the caller's phone num-
ber will be displayed.
• You cannot switch to any other
screen, such as the audio screen
or the settings screen, during a
Bluetooth call.
• Depending on the mobile phone
type, call quality may vary. On
some phones, your voice may be
less audible to the other party.
• Depending on the mobile phone
type, the phone number may not
be displayed.
• Depending on the mobile phone
type, the call switching function
may not be supported.
05
5-123