Washer Fluid; Checking The Washer Fluid Level; Parking Brake; Checking The Parking Brake - Hyundai i10 Owner's Manual

WASHER FLUID

Checking the washer fluid level

Check the fluid level in the washer
fluid reservoir and add fluid if neces-
sary.
Plain water may be used if washer
fluid is not available.
However, use washer solvent with
antifreeze characteristics in cold cli-
mates to prevent freezing.
WARNING
To prevent serious injury or death,
take the following safety precau-
tions when using washer fluid:
• Do not use engine coolant or an-
tifreeze in the washer fluid res-
ervoir. Engine coolant can se-
verely obscure visibility when
sprayed on the windshield and
may cause loss of vehicle con-
trol resulting in an accident or
damage to paint and body trim.
• Do not allow sparks or flames to
contact the washer fluid or the
washer fluid reservoir. Washer
fluid may contain alcohol and
can be flammable.
• Do not drink washer fluid and
avoid contact with skin. Washer
fluid is poisonous to humans
and animals.
• Keep washer fluid away from
children and animals.

PARKING BRAKE

Checking the parking brake

OAC3089008TU OAC3089008TU
Check the stroke of the parking brake
by counting the number of "clicks''
heard while fully applying it from the
released position.
Also, the parking brake alone should
securely hold the vehicle on a fairly
steep grade. If the stroke is more or
less than specified, we recommend
that the system be inspected by an
authorized HYUNDAI dealer.
Stroke : 5~7 "clicks'' at a force of
OAC3069002TU OAC3069002TU
20 kg (44 lbs, 196 N).
08
8-31