Hyundai i10 Owner's Manual page 167

Hide thumbs Also See for i10:
Table of Contents

Advertisement

High Beam Assist system
(if equipped)
High Beam Assist is a system that
automatically adjusts the headlight
range (switches between high beam
and low beam) according to the
brightness of other vehicles and road
conditions.
System setting
The driver can activate the HBA by
placing the ignition switch to the ON
position and by selecting: 'User
Settings  Lights  High Beam
Assist'. If you disable this setting,
HBA will not work.
The setting of the HBA will be main-
tained, as selected, when the engine
is re-started.
Operating condition
1. Place the light switch in the AUTO
position.
2. Turn on the high beam by pushing
the lever away from you.
3. The High Beam Assist (HBA) (
indicator will illuminate.
4. The High Beam Assist (HBA) will
turn on when vehicle speed is
above 40 km/h (25 mph).
1) If the light switch is pushed away
2) If the light switch is pulled
3) If the light switch is pulled
OAC3059025TU
OAC3059025TU
4) If the light switch is placed to the
When the High Beam Assist (HBA) is
operating, the high beam switches to
low beam in the following conditions.
- When the headlight of an on-com-
ing vehicle is detected.
- When the tail light of a vehicle in
front is detected.
- When the headlight or tail light of a
motorcycle or a bicycle is detected.
- When the surrounding ambient
light is bright enough that high
beams are not required.
- When streetlights or other lights
are detected.
- When the light switch is not in the
)
AUTO position.
- When the High Beam Assist (HBA)
is off.
- When vehicle speed is below 30
km/h (19 mph).
when the High Beam Assist
(HBA) is operating, the High
Beam Assist (HBA) will turn off.
towards you when the high
beam is off, the high beam will
turn on. When you let go of the
light switch, the lever will move
to the middle and the high beam
will turn off.
towards you when the high
beam is on by the High Beam
Assist (HBA), and the High
Beam Assist (HBA) will turn off.
headlight position (
Beam Assist (HBA) will turn off
and the low beam will be on
continuously.
05
), the High
5-39

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents