Importing A Still Image From A Usb Flash Drive; Assigning Still Images To Channels 7 And 8; Deleting A Still Image - Roland V-60HD Owner's Manual

Importing a Still Image from a USB Flash Drive

This imports into the unit a still image saved on a USB flash drive.
Supported still-image formats and resolutions
Still-image file formats that can be imported are as follows.
Explanation
Format Bitmap (.bmp), 24-bit color, uncompressed
Resolution
In conformity with system format (p. 12)
No more than 8 single-byte alphanumeric characters
File name
* Be sure to append the ".bmp" file extension.
Importing a still image
NOTE
5 All video input stops while a still image is being
imported from a USB flash drive.
5 Large-size still-image files might take some time to import.
5 When you're using a USB flash drive for the first time, be sure to
format it on the V-60HD (p. 33).
5 Depending on the USB flash drive, recognition of the flash
drive might take some time.
1.
Save the still image in the root directory of the USB flash
drive.
2.
Connect the USB flash drive containing the saved still image
to the USB MEMORY port.
3.
Select the [MENU] button0"USB MEMORY"0"LOAD STILL
IMAGE."
4.
Use the [VALUE] knob to select "STILL IMAGE 1" or "STILL
IMAGE 2" as the memory where the still image is saved.
A " " symbol is displayed for memory where a still image is already
saved.
5.
Press the [VALUE] knob.
The USB LOAD screen appears. The names of the files on the USB
flash drive are displayed on this screen.
6.
Select the still image file you want to import, then press the
[VALUE] knob.
A confirmation message appears.
If you want to cancel the operation, press the [EXIT] button.
7.
Use the [VALUE] knob to select "YES," then press the [VALUE]
knob.
The still image is imported into the unit.
8.
Press the [MENU] button to quit the menu.

Assigning Still Images to Channels 7 and 8

This takes a still image that has been captured or imported from a
USB flash drive, and assigns it to channel 7 or 8.
1.
Select the [MENU] button0"VIDEO INPUT"0"STILL/BKG
7/8"0"INPUT 7 ASSIGN" or "INPUT 8 ASSIGN."
2.
Use the [VALUE] knob to select the memory where the still
image is saved.
A " " symbol is displayed for memory where a still image is already
saved.
3.
Press the [VALUE] knob to apply the setting.
4.
Press the [MENU] button to quit the menu.
MEMO
Assigning a monochrome picture (background color)
You can also assign a monochrome picture (background color)
to channel 7 or 8.
In step 2, set "INPUT 7 ASSIGN" or "INPUT 8 ASSIGN" to
"BACKGROUND. " Also, use "BACKGROUND COLOR" to specify
the background color.
* The background-color setting is shared by channels 7 and 8.

Deleting a Still Image

This deletes a still image saved in the unit.
1.
Select the [MENU] button0"SYSTEM"0"DELETE STILL
IMAGE."
2.
Use the [VALUE] knob to select "STILL IMAGE 1" or "STILL
IMAGE 2" as the memory you want to delete.
A " " symbol is displayed for memory where a still image is already
saved.
3.
Press the [VALUE] knob.
A confirmation message appears.
If you want to cancel the operation, press the [EXIT] button.
4.
Use the [VALUE] knob to select "YES," then press the [VALUE]
knob.
The still image is deleted.
5.
Press the [MENU] button to quit the menu.
Video Operations
19