Upgrading With The Pp332 Upgrade Kit - Juniper CTP2000 Series Upgrade

Circuit to packet platform upgrade to ctpos 7.x
Hide thumbs Also See for CTP2000 Series:
Table of Contents

Advertisement

Upgrading with the PP332 Upgrade Kit

Copyright © 2015, Juniper Networks, Inc.
NOTE:
The system may go through multiple reboots during this process.
The BIOS, FPGAs, and the firmware on the cards may be updated. If the
power is removed during these upgrades, the cards may become unusable.
Please ensure that the process continues until completion. Failure to do
so may render the system unusable.
Power down the system through either the menu or CTPView.
1.
Remove the power cord.
2.
Remove the RTM from the chassis and remove the old CompactFlash card from the
3.
RTM. See
"Installing or Removing a CTP2000 Series CompactFlash Card" on page
Install the 4-GB compact flash from the upgrade kit in the RTM and reinstall the RTM
4.
in the chassis. See
"Installing or Removing a CTP2000 Series CompactFlash Card"
on page
26.
Attach a terminal server or similar device to the serial console port, COM2, on the RTM.
5.
This device will be used to interact with the script that runs when the upgrade
CompactFlash card is booted.
Remove the CPU card from the chassis, and replace the memory module on the CPU
6.
card with that from the upgrade kit. Install the memory module shipped with the kit
only after you have finished these tasks. Reinstall the CPU module in the chassis when
finished. See
"Installing or Replacing CTP2000 DRAM Memory Modules in the PP310
or PP332 CPU" on page 23
Upgrades.
Reconnect all Ethernet cables.
7.
Replace the power cord.
8.
Power on the system and follow the procedure
9.
Card" on page 14
to respond to the instructions that appear on the serial console.
NOTE:
The system may go through multiple reboots during this process.
The BIOS, FPGAs, and the firmware on the cards may be updated. If the
power is removed during these upgrades, the cards may become unusable.
Please ensure that the process continues until completion. Failure to do
so may render the system unusable.
Chapter 2: Upgrading the CTP2000 Series Device to CTPOS 7.x
and Upgrading CTP2000 Series Components for Memory
"Using the Upgrade CompactFlash
26.
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ctp2000-ram-rtm-upgCtp2000-ram-upg

Table of Contents