Registering Your Upgrade; Related Procedures - Juniper CTP2000 Series Upgrade

Upgrading the CTP2000 Series Device to CTPOS 7.x

Registering Your Upgrade

Related Procedures

22
To register your upgrade:
Locate the Access Install Base web page at
1.
https://www.juniper.net/customers/csc/management/updateinstallbase.jsp
Enter the following required information:
2.
System Model Number
System Serial Number
Support/Level Service Part Number
Interface Card/Module Model Number—Include for replacement RTM
Interface Card/Module Serial Number—Include for replacement RTM
Support/Level Service Part Number
Company Name
Site Address
Where Equipment Will Be Moved
Authorized Contract Name, Phone, and Email
Name of the Upgrade—Enter the name of your upgrade kit:
CTP2000-RAM-RTM-UPG or CTP2000-RAM-UPG
Click .
Submit
3.
The following procedures are referenced by the upgrade procedures.
Servicing the CTP2000 CPU on page 23
Installing or Replacing CTP2000 DRAM Memory Modules in the PP310 or PP332
CPU on page 23
Restoring BIOS Defaults for the CTPOS 7.0R1 and Later Upgrade (PP310) on page 24
Installing or Removing a CTP2000 Series CompactFlash Card on page 26
Copyright © 2015, Juniper Networks, Inc.