Pp833 Upgrade Kit - Ctp2000-Ram-Rtm-Upg; Chapter 1 Introduction To Ctpos 7.0 Upgrade Kits - Juniper CTP2000 Series Upgrade

PP833 Upgrade Kit - CTP2000-RAM-RTM-UPG

Copyright © 2015, Juniper Networks, Inc.
NOTE: The 4-GB upgrade CompactFlash card and USB to CompactFlash
adapters are the same in both kits. Whereas the PP310 and PP332 use the
same model RTM after you complete the upgrade, the RTMs are jumpered
differently for the two processors. Switching RTMs from a PP310 to a PP332
or vice versa without changing the jumper settings can damage the CPU.
The PP833 upgrade kit contains:
4-GB CTPOS 7.0R1 upgrade CompactFlash card
USB to CompactFlash adapter
1-GB ECC RAM module (two slots of 4096 MB)
Rear transition module (RTM)
Jumper (for BIOS reset)
RAM Details
Handle 0x001B, DMI type 17, 34 bytesMemory Device
Error Information Handle: 0x001D
Width: 64 bits Size: 4096 MB
Locator: ChannelA-DIMM0
Type Detail: Synchronous
Serial Number: No serial number
Number: No part number
MHzHandle 0x001F, DMI type 17, 34 bytesMemory Device
Error Information Handle: 0x0021
Width: 64 bits Size: 4096 MB
Locator: ChannelB-DIMM0
Type Detail: Synchronous
Serial Number: No serial number
Number: No part number
MHz
Chapter 1: Introduction to CTPOS 7.0 Upgrade Kits
Total Width: 128 bits
Form Factor: DIMM
Bank Locator: BANK 0
Speed: Unknown
Asset Tag: 0123456789
Rank: Unknown Configured Clock Speed: 1333
Total Width: 128 bits
Form Factor: DIMM
Bank Locator: BANK 2
Speed: Unknown
Asset Tag: 0123456789
Rank: Unknown Configured Clock Speed: 1333
Array Handle: 0x001A
Data
Set: None
Type: DDR3
Manufacturer: CCT Memory
Part
Array Handle: 0x001A
Data
Set: None
Type: DDR3
Manufacturer: CCT Memory
Part
9