Wiring Option; Cable/Connector Sets - Mitsubishi Electric Melservo HF-KN Series Instruction Manual

5. WIRING OPTION

5. WIRING OPTION
WARNING
CAUTION

5.1 Cable/connector sets

Purchase the cable and connector options indicated in this section.
Before connecting options, turn off the power and wait for 15 minutes or more
until the charge lamp turns off. Otherwise, an electric shock may occur. In
addition, when confirming whether the charge lamp is off or not, always confirm it
from the front of the servo amplifier.
Use specified peripheral equipment and options. Otherwise, it may cause a
malfunction or fire.
POINT
The IP rating indicated for cables and connectors is their protection against
ingress of dust and water when they are connected to a servo amplifier or servo
motor. If the IP rating of the cable, connector, servo amplifier and servo motor
vary, the overall IP rating depends on the lowest IP rating of all components.
5 - 1