Drum Setup Controls - Yamaha MU128 Owner's Manual

Multi Edit Mode

Drum Setup Controls

The Drum Setup controls allow you to make a wide variety of settings
for the drum sounds in a Drum Part. These settings include Pitch con-
trols, Level, Pan, effect send, filter controls and EG (Envelope Genera-
tor), among others. Moreover, these parameters can be set to completely
independent values for each of the drum sounds in a Part.
The Drum Setup controls can only be called up by first selecting a Part to
which a Drum Part is assigned. (For basic information on using the Drum
setup controls, see page 65.)
Path: [EDIT] button

Drum Setup Controls ______________________________________

126
"DRUM"
Pitch Parameters .................................................... 127
Pitch Coarse
Pitch Fine
Velocity Pitch Sensitivity (VelPchSens)
Level ...................................................................... 127
Level
Pan ........................................................................ 127
Pan
Effect Send Parameters ........................................... 127
Reverb Send (Rev Send)
Chorus Send (Cho Send)
Variation Send (Var Send)
Filter Parameters .................................................... 128
LPF Cutoff Frequency (LPF Cutoff)
LPF Resonance (LPF Reso)
Velocity LPF Cutoff Sensitivity (VelLPFSens)
HPF Cutoff Frequency (HPF Cutoff)
EQ Parameters ....................................................... 129
EQ Low Frequency (Low Freq)
EQ Low Gain
EQ High Frequency (High Freq)
EQ High Gain
EG Parameters ....................................................... 129
EG Attack
EG Decay 1
EG Decay 2
MU128 Multi Mode