Drum Setup Edit - Yamaha QY700 Owner's Manual

4. Drum Setup Edit

4. Drum Setup Edit
10.Pitch fine
3.Note name
4.Drum kit
5.Reverb send
6.Chorus send
7.Variation send
8.Pan
9.Level
SHIFT F1
Parameter
1 Data display
2 Location
3 Note name
4 Drum kit
5 Reverb send
6 Chorus send
7 Variation send
8 Pan
9 Level
10 Pitch fine
11 Pitch coarse
12 Alternate group
13 Key assign
14 Receive note off
15 Filter cutoff
Filter resonance
16 EG attack
EG decay 1
EG decay 2
182
1.Data display
F2 F3 F4
15.Filter cutoff /
11.Pitch coarse
Filter resonance
Values
display only
001 – 999
C# - 1 – C5
001 StandKit, 002 Stnd2Kit, 009 Room Kit, 017
Rock Kit, 025 ElectKit, 026 AnalgKit, 033 Jazz
Kit, 041 BrushKit, 049 ClascKit, 001 SFX1 Kit,
002 SFX2 Kit
000 – 127
000 – 127
000 – 127
Random, Left63 – Center – Right63
000 – 127
-64 – +00 – +63
-64 – +00 – +63
000 – 127
SINGLE, MULTI
OFF, ON
-64 – +00 – +63
-64 – +00 – +63
-64 – +00 – +63
-64 – +00 – +63
-64 – +00 – +63
Chapter 3. VOICE MODE
2.Location
12.Alternate
group
14.Receive
note off
13.Key
assign
F5 F6 SHIFT EXIT
16.EG attack /
EG decay 1 /
EG decay 2
Displays the data specified for the currently selected part.
Displays the playback location of the song in measures and beats.
Specify the note to select the instrument that you wish to edit.
Select the drum kit that will be the basis for setup editing.
Specify the amount sent from each instrument to the Reverb effect.
Specify the amount sent from each instrument to the Chorus effect.
Specify the amount sent from each instrument to the Variation effect.
Specify the stereo location of each instrument.
Specify the volume of each instrument.
Make fine adjustments to the pitch of each instrument.
Adjust the pitch of each instrument in semitone steps.
Prevent instruments which should not sound simultaneously from
sounding simultaneously.
Specify how multiple MIDI Note On messages of the same note
which are received while a note is sounding will be handled by
each instrument.
Specify whether or not MIDI Note Off messages will be received
by each instrument.
Adjust the filter cutoff frequency for each instrument to modify the tone.
Adjust the filter resonance for each instrument to modify the tone.
Adjust the time from when the note is played until the maximum
volume is reached.
Adjust the time from when the maximum volume is reached to
when the volume reaches the decay level.
Adjust the time from when the decay level is reached to when the
volume reaches zero.
Voice Mode
Mixer
Tune
Voice Edit
Drum Setup 1 Edit
Drum Setup 2 Edit
Function See page
P.183
P.183
P.184
P.184
P.184
P.184
P.184
P.184
P.184
P.184
P.185
P.185
P.185
P.185
P.185
P.185