Performance Part Control; All Part - Yamaha MU128 Owner's Manual

Performance Part Control

Performance Part Control

All Part

For basic information on using the All Part controls in the Performance mode, see page
70.
Performance Bank
Settings: Pre (Preset), Int (Internal)
This determines the bank of Performance
programs: Preset or Internal. Preset Perfor-
mances are those that have been created and
loaded at the factory; the Internal bank is
reserved for user-created Performances.
NOTE
When changing Performance banks, there may
be a slight delay before the sound changes.
Performance Number
Range: 001 — 100
This determines the Performance number.
NOTE
When changing Performance numbers, there
may be a slight delay before the sound changes.
132
Performance Volume (Pfm Vol)
Range:
This determines the overall Volume of the
Performance.
NOTE
When the Variation effect is used as a System
effect (page 153), you may have to adjust the
Variation Return parameter (page 133) as well
as the Performance Volume parameter, to
achieve the desired balance.
Performance Pan (Pfm Pan)
Range:
This determines the overall Pan position
of the Performance (except for the effect
sound).
NOTE
The overall Pan position offsets the individual
Pan settings of each Part (page 135). A set-
ting of "C" (center) maintains the individual
Pan settings of each Part.
MU128 Performance Mode
000 — 127
L63 — C — R63