Equalizer (Eq) - Yamaha MU128 Owner's Manual

Multi Edit Mode
Equalizer (Part EQ)
NOTE
This menu is not available when the Drum Part is selected. However, the Drum
Part EQ can be set for each of the individual parts in the Drum Setup Controls
(page 129).
Path: [EDIT] button
EQ (Equalizer) ____________________________________________
The Part EQ parameters let you adjust and set the tonal quality of an
individual Part's Voice, such as boosting the bass sound, or making it
brighter. This is a two-band equalizer with wide frequency variation for
each band, and is independent of the overall EQ controls (page 155).
EQ Low Frequency (Low Freq)
Range: 32 Hz — 2.0 kHz
This determines the frequency which is
boosted or cut (in the Low Gain param-
eter below) for each Part.
EQ Low Gain
Range: –64 — +00 — +63
This determines the level of the selected
frequency (in "Low Freq" above). Posi-
tive values boost the level of the selected
frequency and negative values attenuate
it.
116
"EQ"
EQ Low Frequency
EQ Low Gain
EQ High Frequency
EQ High Gain
EQ High Frequency (High Freq)
Range:
This determines the frequency which is
boosted or cut (in the High Gain param-
eter below) for each Part.
EQ High Gain
Range:
This determines the level of the selected
frequency (in "High Freq" above). Posi-
tive values boost the level of the selected
frequency and negative values attenuate
it.
MU128 Multi Mode
500 Hz — 16 kHz
–64 — +00 — +63