Yamaha MU128 Owner's Manual page 135

Program (Voice) Number
Range:
01 — 04 part: 001 — 128
A/D1 part: 001 — 013
A/D2 part: 001 — 005
This determines the Voice for the selected
Part. (Refer to the SOUND LIST &
MIDI DATA booklet.)
NOTE
Drum Voices are not available in the Perfor-
mance mode.
Volume
Range: 000 — 127
This determines the Volume setting for
the selected Part's Voice.
Pan
Settings: Rnd (Random), L63 — C —
R63
This determines the stereo position of the
selected Part's Voice. A setting of "Rnd"
(Random) randomly assigns the Voice to a
pan position. This is useful when you want
to have different Voices sound from differ-
ent random parts of the stereo image.
NOTE
The Random setting has no effect on Parts to
which Insertion effects have been assigned.
Random is also unavailable for the A/D1 and
A/D2 Parts.
Reverb Send (RevSend)
Range:
This determines the level of the selected
Part's Voice that is sent to the Reverb ef-
fect. A value of 000 results in a com-
pletely "dry" Voice sound.
NOTES
• Keep in mind that the Reverb effect must
be properly enabled and set for this param-
eter to work as intended. (See page 88.)
• Also keep in mind that the overall Reverb
effect depends on the Reverb Return set-
ting in the All Part controls (page 133).
Chorus Send (ChoSend)
Range:
This determines the level of the selected
Part's Voice that is sent to the Chorus ef-
fect. A value of 000 results in a completely
"dry" Voice sound (no Chorus effect).
NOTES
• Keep in mind that the Chorus effect must
be properly enabled and set for this param-
eter to work as intended. (See page 88.)
• Also keep in mind that the overall Chorus
effect depends on the Chorus Return set-
ting in the All Part controls (page 133).
MU128 Performance Mode
Performance Part Control
000 — 127
000 — 127
135