Yamaha MU128 Owner's Manual page 100

Yamaha tone generator owner's manual
Hide thumbs Also See for MU128:
Table of Contents

Advertisement

A/D Inputs
Bank 019
C A U T I O N
1
Do not use line level signals (such as from keyboards, etc.) with the mic level
banks. The signal may be too high, resulting in damage to the MU128.
5 Select the desired preset.
Do this in the normal way (as you selected Voices), using the
[SELECT </>] buttons to highlight the program number param-
eter, then using the [VALUE -/+] buttons to select the preset.
The available presets have been specially programmed to suit
the type of input selected. For example, presets for Mic input in-
clude Karaoke and Vocal; Guitar input presets include Tube,
Stack and Phaser. Explore some of these settings on your own
with a microphone and different instruments. (For a list of all
available A/D input presets, refer to the "Sound List & MIDI
Data" booklet.)
6 Turn up the level.
If the connected source has a volume control, first set it to an
appropriate level, then slowly bring up the A/D INPUT VOL-
UME control on the MU128 while playing the instrument (or
singing into the microphone), until the level is appropriate.
100
For input of stereo audio equipment
(such as CD players, cassette decks, etc.).
MU128 Guided Tour

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents