Manually Selecting Voice Banks And Voices - Yamaha MU128 Owner's Manual

3 Use the [VALUE -/+] buttons or data dial to select the desired
Voice from within the current category.
The selected bank and Voice numbers start from the lowest
number and "wrap around" at the beginning and end.
Try selecting different Voices for the other Parts using the same
operation.
Details
The MU128 features two different Voice maps: MU Basic and MU100 Native.
MU Basic — This Voice map maintains compatibility with the widest range of XG
tone generators.
MU 100 Native — This Voice map (selected as the default at the factory) includes
the upgraded Voices and Voices utilizing new waveforms not included on older
XG tone generators.
These two Voice maps have the same order and number of the Voices. However, the
actual sounds and overall balance may differ for each map when playing back iden-
tical song data, since the actual character of some of the Voices differs greatly.
When playing back song data created on or for other XG tone generators, try switching
between the two different maps to achieve the optimum playback condition for the
song.
The map setting can be changed in the Utility mode's System parameters (page
161).
The MU128 includes additional Voices for both of the two maps that are not in-
cluded on the MU100.

Manually Selecting Voice Banks and Voices

Operation
1 Select a Part.
Use the [PART -/+] buttons.
For this example, select Part 1. Press the appropriate button until
"01A1" appears in the PART section of the display.
Selecting and Playing Individual Voices
MU128 Guided Tour
45