Send Variation To Reverb; Send Variation To Chorus - Yamaha MU128 Owner's Manual

Variation (VAR)
When set to THRU, the sound of the Part (or
Parts) is output without any Variation effect.
Generally, when Variation Connection is set
to INS (Insertion), you should set the Type to
Thru. When Variation Connection is set to SYS
(System), you should set the Type to NO EF-
FECT.
Dry/Wet (Insertion connection)
Range: D63>W — (D=W) — D<W63
Adjusts the level balance of original
sound (dry, or D) and processed sound
(wet, or W). A setting of (D=W) results
in an equal balance of dry and wet sound.
NOTE
This parameter may not be available depend-
ing on the effect type.
Assignable Controller 1 Variation Con-
trol (AC1VarCtrl) (Insertion connection)
Range: — 64 — +100 — +63
Determines the amount of effect the As-
signable Controller has on the Variation
effect. Each of the Variation effect types
have one parameter which can be con-
trolled by the AC1. (For details, see the
"Effect Parameter List" of the "SOUND
LIST & MIDI DATA" booklet.)
Variation Pan (VarPan) (System
connection)
Range: L63 — C — R63
Determines the pan position of the Varia-
tion effect.

Send Variation to Chorus

(SendVar Cho) (System connection)
Range: 000 — 127
Determines the amount of Variation ef-
fect sound that is sent to the Chorus ef-
fect.
150

Send Variation to Reverb

(SendVar Rev) (System connection)
Range:
Determines the amount of Variation ef-
fect sound that is sent to the Reverb ef-
fect.
Variation Connection (VarConnect)
Settings:
Determines how the Variation effect is
connected in the effect chain of the
MU128. When set to SYS (System),
Variation is applied to all Parts, accord-
ing to the amount of Variation Send set
for each Part. When set to INS (Insertion),
Variation is applied to only the selected
Part, set in the Variation Send parameter
(pages 108, 128, 136).
NOTE
The parameters above are common to nearly
all the Variation effect types. (Exceptions are
described in the separate SOUND LIST &
MIDI DATA booklet.)
MU128 Effect Edit Mode
000 — 127
INS (Insertion), SYS (System)