2.5.1.3
Rotor as individual component
Note
IATA regulations must be complied with when transporting rotors by air.
2.5.1.4
Ordering notes
You can order the built-in torque motor (stator, rotor) using one single order designation
(article number). Spare parts and accessories can be ordered by specifying separate order
designations (see "Ordering examples (Page 46))".
Note
The cables are permanently attached. You cannot subsequently change the cables.
When selecting a motor, also observe the information in Chapter "Data of the power cable on
the stator (Page 251)".
The cooling connection adapter is not included in the standard built-in torque motor. For the
separate order designation, see Chapter "Options (Page 85)".
1FW6 High Speed built-in torque motors
Configuration Manual, 01/2020, 6SN1197-0AE03-0BP3
Description of the motor
2.5 Selection and ordering data
45