Configuration; Configuring Software - Siemens SIMOTICS T-1FW6 Series Configuration Manual

Configuration

Note
Siemens provides the Application & Mechatronic Support Direct Motors service
Contact your local Siemens office if you require mechatronic support with the following:
• Mechanical design of the machine
• Closed-loop control technology to be used
• Resolution and measuring accuracy of the encoder
• Optimum integration of the encoder into the mechanical structure.
Siemens will support you with dimensioning, designing and optimizing your machine by
means of measurement-based and computer-based analyses.
You can obtain additional information from your Siemens contacts. You will find the Internet
link on "Technical Support" in the "Introduction".
5.1

Configuring software

The STARTER commissioning tool offers
● Commissioning
● Optimization
● Diagnostics
Table 5- 1
Commissioning tool
STARTER
German, English, French, Italian, Spanish
1FW6 High Speed built-in torque motors
Configuration Manual, 01/2020, 6SN1197-0AE03-0BP3
Article number for STARTER
Article no. of the DVD
6SL3072-0AA00-0AG0
5
87