Preparation For Use - Siemens SIMOTICS T-1FW6 Series Configuration Manual

Preparation for use

Risk of death and crushing as a result of permanent magnet fields
Severe injury and material damage can result if you do not take into consideration the
safety instructions relating to permanent magnet fields.
• Observe the information in Chapter "Danger from strong magnetic fields (Page 32)".
Also retain the original packaging of the stators and rotors and the spacer film. You will need
the original packaging for the separate storage and transportation of the stators and rotors.
The spacer film is required during assembly and disassembly of the motors.
Risk of toppling over
Motors, stators, and rotors must not be stacked too high – risk of death, personal injury
and/or material damage.
• Never stack packed or unpacked motors, stators or rotors on top of one another.
• Only transport and store motors, stators and rotors in the horizontal position.
• Observe the safety instructions and handling on the packaging.
1FW6 High Speed built-in torque motors
Configuration Manual, 01/2020, 6SN1197-0AE03-0BP3
WARNING
WARNING
7
233