Technical Features - Siemens SIMOTICS T-1FW6 Series Configuration Manual

Description of the motor
2.3 Technical features and ambient conditions
2.3.3

Technical features

Note
The values specified in the following table only apply in conjunction with the system
prerequisites described in "System integration".
Table 2- 1
Technical feature
Motor type
Type of construction
Degree of protection according to
EN 60034-5
Cooling method
Pressure in the cooling circuit
Cooler connection
Thermal motor protection
Temperature monitoring
2nd rating plate
Insulating material class of stator
winding according to EN 60034-1
Impulse withstand voltage
insulation class according to
EN 60034-18-41
Magnet material
36
Standard version of the 1FW6 High Speed built-in torque motor
Version
Synchronous motor with permanent magnet rotor – with a high
number of poles
Individual components: stator, rotor
Motor: IP23
The final degree of protection (minimum degree of protection:
IP54) of the built-in motor must be realized by the machine
manufacturer.
Water cooling
•
•
Max. 10 bar (static)
Motors with a cooling jacket:
Must be connected by customer
Motors with integrated cooling:
Connection with/without cooling connection adapter, see Chapter
"Cooler connection (Page 125)"
For motors with a single power connection:
1 x triple PTC thermistor with response threshold +130 °C
(according to DIN 44081/44082)
For motors with a double power connection:
Triple PTC thermistors of the first and second winding are
connected in series.
Evaluation via Sensor Modules: SME120/SME125/TM120
(see SINAMICS S120 Manual)
1 x Pt1000 (according to EN 60751)
Evaluation via Sensor Modules: SME120/SME125/TM120
(see SINAMICS S120 Manual)
Enclosed separately
Temperature class 155 (F)
IVIC: C
Rare earth material
Jacket cooling:
Frame size 1FW6092, 1FW6132, 1FW6152
Integrated cooling (2 cooling circuits):
Frame size 1FW6192, 1FW6232
Configuration Manual, 01/2020, 6SN1197-0AE03-0BP3
1FW6 High Speed built-in torque motors