Options; Round Sealing Ring (O-Ring) - Siemens SIMOTICS T-1FW6 Series Configuration Manual

A holding brake may also be required if:
● The bearing friction does not compensate or exceed the cogging torques and unexpected
movements result.
● Unexpected movements of the drive can lead to damage (e.g. a motor with a large mass
can also generate a high level of kinetic energy).
● Drives with a weight load must be shut down and de-energized in any position.
To prevent movements when the drive is switched on or off, the holding brake response
must be synchronized with the drive.
During commissioning, refer to the documentation for the drive system being used.
4.2

Options

4.2.1

Round sealing ring (O-ring)

1FW6 High Speed built-in torque motors
Configuration Manual, 01/2020, 6SN1197-0AE03-0BP3
Motor components and options
4.2 Options
85