Procedure When Installing The Motor - Siemens SIMOTICS T-1FW6 Series Configuration Manual

Configuration
5.4 Mounting
Table 5- 6 Depths of engagement, screw types and tightening torques for stators and rotors
Frame size Component
1FW6092 Stator
1FW6092 Rotor
1FW6132 Stator
1FW6132 Rotor
1FW6152 Stator
1FW6152 Rotor
1FW6192 Stator
1FW6192 Rotor
1FW6232 Stator
1FW6232 Rotor
5.4.5

Procedure when installing the motor

Sequence of work steps for installing the motor
Personal injury and damage to property during motor installation
Injury and/or destruction of motor components can occur if you do not observe the specified
sequence of steps when installing the motor.
• Perform work steps in the specified sequence during installation.
122
Depth of engagement in mm
Min. required
10.6
7.4
7.4
7.4
7.4
7.4
8
9.7
8
9.7
WARNING
Screw type
(with property
Max. admissible
class)
12 M5 (8.8)
12 M6 (10.9)
12 M6 (10.9)
12 M6 (10.9)
12 M6 (10.9)
12 M6 (10.9)
12 M8 (10.9)
12 M8 (10.9)
12 M8 (10.9)
12 M8 (10.9)
1FW6 High Speed built-in torque motors
Configuration Manual, 01/2020, 6SN1197-0AE03-0BP3
Tightening torque
in Nm
for μ = 0.1
ges
5.2
13.2
13.2
13.2
13.2
13.2
31.8
31.8
31.8
31.8