Output View Function; Ch View (Channel View) Screen - Yamaha PM5D Owner's Manual

5 7 8 J
6
9
E DELAY
This specifies the delay time for each surround channel
in a range of 0–1000 msec. The current value is shown
by the two boxes below the knob. (The upper box
shows the delay time in millisecond units, and the
lower box shows the delay time in the units selected in
the MIX 1-24 screen of the OUT DELAY function.)
F DELAY ON/OFF
Turns the delay on/off for each surround channel.
G FADER (Fader level)
Adjusts the level of the signal sent from the surround
channel to the corresponding MIX bus in a range of
–∞ to +10 dB. The current value is shown in the box
below.
H CUE
This button lets you cue-monitor the surround chan-
nel. This is linked with the [CUE] key of the
corresponding MIX channel.
I ON/OFF (Channel on/off)
Turns the surround channel on/off. This is linked with
the MIX [ON] key of the corresponding MIX channel.
J Level meter
Indicates the output level of the surround channel.
K Surround channel
This is the name of the surround channel.

OUTPUT VIEW function

CH VIEW (Channel view) screen

This screen displays the mix parameters of the currently
selected MIX channel, MATRIX channel, or STEREO A/B
channel. In this screen you can also edit the principal
parameters and access other screens.
CH VIEW
K
A Channel
This is the number of the channel you are editing. If
the corresponding MIX/MATRIX channel is paired (or
if a STEREO A/B channel is selected), a heart symbol is
displayed at the right. You can click this symbol to
enable/disable pairing for the MIX/MATRIX channel.
Note
The screen shown above is for when a paired channel is
selected. If the selected channel is not paired, the parameters
for only one channel are displayed, and pairing-related set-
tings are not displayed.
B EQ
This area shows the post-EQ level, the approximate EQ
response, and the EQ on/off status. You can click the
EQ ON/OFF button to switch EQ on/off in this screen.
PM5D/PM5D-RH Owner's Manual
1
2
3
4
Reference section
245