Mix 1-24 Screen; Matrix/Stereo Screen - Yamaha PM5D Owner's Manual

MIX 1-24 screen

MATRIX/STEREO screen

These screens show the compressor settings for all output
channels. Here you can also copy compressor settings
between output channels.
MIX 1-24
MATRIX/STEREO
1
2
3
4
A Compressor graph
This mini-graph shows the approximate compressor
response for each output channel.
When you click the graph at which the cursor is cur-
rently located, the COMP PARAM screen for that
channel will appear.
In this screen you can drag and drop the mini-graph
from the desired channel to copy its compressor set-
tings. (When you drag and drop the mini-graph, a
popup window will ask you to confirm the copy
operation.)
You can also copy compressor settings between the
MIX 1-24 screen and the MATRIX/STEREO screen.
First drag the mini-graph over the MIX 1-24 tab or
MATRIX/STEREO tab in the screen (the screen will
switch). Then drag and drop the mini-graph onto the
desired channel, and a message will ask you to confirm
the copy operation.
B Level meters
These meters show the amount of gain reduction pro-
duced by the compressor (at left), and the peak level of
the signal after passing through the compressor (at
right). If the signal clips, the OVER segment will light.
C COMP ON/OFF (Compressor on/off)
Turns the compressor on/off for that channel.
D Channel
This is the number of the channel you are editing. Two
paired channels are indicated by a heart symbol dis-
played between them.
PM5D/PM5D-RH Owner's Manual
Reference section
231