General Specifications - Yamaha PM5D Owner's Manual

General Specifications

You paired input channels, but the
signal phase is incorrect
When you recall a scene, some
channels/parameters are not
updated
You turn on a CUE button in the
EFFECT PARAM screen, but it is
automatically defeated
Can't make boost settings with the
GEQ
When you recall a scene, it takes a
certain amount of time for the faders
to stop
The panel LEDs or LCD display are
too dark / too bright
General Specifications
Sampling Frequency
Signal Delay
Fader
Fader Resolution
Maximum Voltage Gain
Crosstalk (@1kHz)
Dimensions
Net Weight
Power Requirements
Operation free-air Temperature Range
Storage Temperature Range
Included Accessories
Optional Accessories
346
PM5D/PM5D-RH Owner's Manual
❍ Set the paired input channels to the same phase setting. Even when channels are paired, the phase set-
tings are not linked. (➥ p.45)
❍ Could those channels/parameters be set to Recall Safe or Selective Recall? (➥ p.84, 86)
❍ This is defeated automatically when you switch screens in the display. (➥ p.152)
❍ In the GEQ PARAM screen, could LIMIT be set to –24 dB? (➥ p.111)
❍ Could you have specified a fade time? (➥ p.87)
❍ In the UTILITY function PREFERENCE 2 screen, use the BRIGHTNESS setting to adjust the brightness.
(➥ p.188)
Internal: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
External: 44.1 kHz (–10%) to 48 kHz (+6%)
88.2 kHz (–10%) to 96 kHz (+6%)
PM5D: Less than 2.3 ms INPUT to STEREO A,B (@Fs = 48 kHz)
Less than 1.15 ms INPUT to STEREO A,B (@Fs = 96 kHz)
PM5D-RH: Less than 2.5 ms INPUT to STEREO A,B (@Fs = 48 kHz)
Less than 1.25 ms INPUT to STEREO A,B (@Fs = 96 kHz)
100mm motorized x38
+10 to –138, –∞ dB (1024 steps/100 mm)
PM5D: 84 dB INPUT1-48 to Each Output
PM5D-RH: 86 dB INPUT1-48 to Each Output
–80 dB Adjacent Input Channels (INPUT1-48)
1551 x 950 x 283 mm (W x D x H)
PM5D: 98 kg
PM5D-RH: 97 kg
PM5D: 480W, DC 24V, 20A (Use PW800W Only)
PM5D-RH: 528W, DC 24V, 22A (Use PW800W Only)
+10 °C to +35 °C
–20 °C to +60 °C
Owner's Manual
Gooseneck Lamps x 3
Power Supply PW800W Connection Cable
Studio Manager CD-ROM
Studio Manager Installation Guide
mini YGDAI cards
Power Supply PW800W
Power Supply Link Cable PSL120
Reference section