INPUT DCA/GROUP function
MUTE GROUP ASSIGN screen
Here you can specify the input channels that will be
assigned to mute groups 1–8. Muting can be switched on/
off together for channels assigned to the same mute group.
MUTE GROUP ASSIGN
Except for the fact that these settings apply to input chan-
nels, the display and operations are the same as in the
OUTPUT DCA/GROUP function MUTE GROUP
ASSIGN screen. Refer to p.235.
Hint
Mute groups 1–8 can be used with both input channels and
output channels. Both types of channel can exist in the identi-
cally-numbered mute group.
272
PM5D/PM5D-RH Owner's Manual
EQ LINK ASSIGN screen
Here you can specify the input channels that will be
assigned to EQ link groups 1–8. EQ parameters are linked
for channels belonging to the same group.
A EQ link group
These are the EQ link group numbers. The number
corresponding to the grid where the cursor is located is
highlighted.
B Grid
This grid lets you assign input channels (horizontal
rows) to EQ link groups (vertical columns). Currently-
patched grids are indicated by a
cursor to the desired grid and press the [ENTER] key
(or click) to set/disable the assignment.
Hint
Input channels and output channels use separate EQ link
groups. Input channels use groups A–H, and output channels
use groups 1–8.
Reference section
EQ LINK ASSIGN
1
2
symbol. Move the