Input/Output Specifications - Yamaha MJ100 Operating Manual

INPUT/OUTPUT SPECIFICATIONS
FREQUENCY RESPONSE +0, —3dB 20Hz ~ 20kHz
TOTAL HARMONIC DISTORTION (20Hz ~ 20kHz) Less than 0.1%
HUM & NOISE (20Hz ~ 20kHz) Rs = 150 ohms — 122 dB (EIN)
STEREO OUT Master fader and MIC fader at Maximum level — 88 dB
CROSSTALK (1kHz)
Adjacent Input
Input to Output
MAXIMUM VOLTAGE GAIN
PHONO IN to MASTER OUT
PHONO IN to STEREO OUT
AUX RETURN to STEREO OUT
PHONO IN to AUX SEND
INST IN to AUX SEND
EQUALIZER (MASTER GEQ)
100, 400, 1K, 3K, 8K 5 BAND +12 dB Maximum
DIGITAL DELAY
SHORT MID LONG 3 Positions
(100ms) (150ms) (200ms)
POWER REQUIREMENTS
(US & Canadian models) AC120V, 60Hz
(General model) AC220, 240V, 50/60Hz
POWER CONSUMPTION
DIMENSIONS (W x H x D) 350 x 77 x 254 mm
(13-3/4" x 3-1/4" x 10")
WEIGHT 2.8 kg (6.2 Ib)
Hum & Noise are measured with 6dB/octave filter at 12.7kHz: equivalent to a 20kHz filter with infinite
dB/octave attenuation.
*
** _ 0dB is referenced to 0.775V rms.
11