Yamaha PM5D Owner's Manual page 112

15
Graphic EQ
When a button is clicked, you can use the DCA faders
to control the faders of that frequency region. The fad-
ers of the selected region are indicated by a red line in
the center of the fader.
While any of the buttons in the ASSIGN TO FADERS
area is on, you can use the FADER MODE section
FADER MODE [A]–[F] keys to select the frequency
region corresponding to these buttons.
Even if all of the buttons in the ASSIGN TO FADERS
area are off, you can hold down the [SHIFT] key and
press one of the FADER MODE [A]–[F] keys to select
the region to be controlled by the DCA faders.
20.0Hz–100Hz
63.0Hz–315Hz
5 Operate DCA faders 1–8.
The corresponding frequency region will be boosted or
cut.
Hint
If the fader of a GEQ module is at the 0 dB position, the
[NOMINAL] LED of the DCA fader will light. If it is at other than
the 0 dB position, the DCA [MUTE] key will light. While the
DCA [MUTE] key is lit, pressing the DCA [MUTE] key will
reset the corresponding band to 0 dB.
6 If you want to use the DCA faders to control a
different region, repeat steps 4–5.
7 When you have finished using the DCA faders
to control the graphic EQ, either press the
FADER MODE [DCA] key or click the OFF but-
ton in the ASSIGN TO FADERS area.
When the [DCA] button is on, the FADER MODE
keys and the DCA faders will return to their normal
state. If you once again want to assign the graphic EQ
to the DCA faders, either click a button in the ASSIGN
TO FADERS area or hold down the [SHIFT] key and
press a FADER MODE [A]–[F] key.
Hint
• GEQ settings are saved as part of the scene. The settings of
a GEQ module can also be saved in the GEQ library. For
details, refer to GEQ LIBRARY screen ( ➥ p.158) in the Ref-
erence section.
• When you switch the display to a different screen, the DCA
fader assignments will be forcibly defeated, and will no
longer function even if you return to the GEQ screen. How-
ever if you turn on the AUTO ASSIGN button in the GEQ
PARAM screen, the DCA faders will automatically be
assigned to the most recently operated region when you
access the GEQ PARAM screen.
112
PM5D/PM5D-RH Owner's Manual
4.00kHz–20.0kHz
2.00kHz–10.0kHz
630Hz–3.15kHz
200Hz–1.00kHz
Operating section