MIX 1-24 screen
MATRIX/STEREO screen
These screens list the EQ settings for all output channels.
Here you can also copy EQ settings between output
channels.
MIX 1-24
MATRIX/STEREO
4
3
A EQ graph
This mini-graph shows the approximate EQ response
for each output channel.
When you click the graph at which the cursor is cur-
rently located, the EQ PARAM screen for that channel
will appear.
In this screen you can drag and drop the mini-graph
from the desired channel to copy its EQ settings.
(When you drag and drop the mini-graph, a message
will ask you to confirm the copy operation.)
You can also copy EQ settings between the MIX 1-24
screen and the MATRIX/STEREO screen. First drag the
mini-graph over the MIX 1-24 tab or MATRIX/STE-
REO tab in the screen (the screen will switch). Then
drag and drop the mini-graph onto the desired chan-
nel, and a message will ask you to confirm the copy
operation.
You can also copy settings between the eight-band EQ
of a MIX channel or STEREO A/B channel and the
four-band EQ of a MATRIX channel. In this case, only
the LOWER four bands will be copied for MIX chan-
nels or STEREO A/B channels.
B EQ ON/OFF (EQ on/off)
Turns the EQ on/off for that channel. This is linked for
paired channels.
C Channel
This is the number of the channel you are editing. Two
paired channels are indicated by a heart symbol dis-
played between them.
D Level meter
This meter indicates the peak level after EQ. If the sig-
nal clips, the OVER segment will light.
PM5D/PM5D-RH Owner's Manual
1
2
Reference section
227