Input/Output Patching; Changing The Output Patching - Yamaha 007POTO-G0 Owner's Manual

Input/output patching

This chapter explains how to edit the input patching and output patching,
how to connect inserts, and how to use direct outputs.
When the LS9 is in the initial state, the output ports (jacks and internal ports) are patched to the
following output channels.
For the LS9-16
Output port (jack / internal port)
OMNI OUT jacks 1–6
OMNI OUT jacks 7–8
Slot output channels 1–8
Slot output channels 9–16
Rack inputs 5A (L), 6A (L), 7A (L), 8A (L)
2TR OUT DIGITAL jack (L/R)
USB memory recorder input (L/R)
For the LS9-32
Output port (jack / internal port)
OMNI OUT jacks 1–12
OMNI OUT jacks 13–14
OMNI OUT jacks 15–16
Slot 1 output channels 1–8
Slot 1 output channels 9–16
Slot 2 output channels 1–8
Slot 2 output channels 9–16
Rack inputs 5A (L), 6A (L), 7A (L), 8A (L)
2TR OUT DIGITAL jack (L/R)
USB memory recorder input (L/R)
However, the above patching can be modified as needed.
If you want to change the output patching, you can either
select the output port that will be the output destination for
each channel, or you can select the channel that will be the
output source for each output port.
Chapter 9

Changing the output patching

Output channels
MIX channels 1–6
STEREO L/R channel
MIX channels 1–8
MIX channels 9–16
MIX channels 13–16
STEREO L/R channel
STEREO L/R channel
Output channels
MIX channels 1–12
MATRIX channels 1–2
STEREO L/R channel
MIX channels 1–8
MIX channels 9–16
MIX channels 1–8
MIX channels 9–16
MIX channels 13–16
STEREO L/R channel
STEREO L/R channel
● Selecting the output port for each out-
put channel
Here's how to select the output port that will be the output
destination for each output channel.
1
Press the [HOME] key to access the
SELECTED CH VIEW screen, and use the
[SEL] keys to select an output channel.
1 2 3
1 Channel number / Channel name
B PATCH popup button
C Port select popup button
HINT
• As an alternative to using the PATCH popup button, you can
also select the output port in the PATCH/NAME popup win-
dow that appears when you move the cursor to the port select
popup button and press the [ENTER] key ( → p. 69).
LS9-16/32 Owner's Manual
9
95