Functions that can be assigned to user-defined keys
Function
PARAMETER 1
NO ASSIGN
—
RECALL
STORE
▲
▼
SCENE
INC RECALL
DEC RECALL
DIRECT RECALL
RECALL UNDO
STORE UNDO
TALKBACK ON
TALKBACK
SELECTED CH
ASSIGN
OSCILLATOR ON
OSCILLATOR
SELECTED CH
ASSIGN
CUE CLEAR
—
MONITOR ON
SELECTED CH
ASSIGN
MONITOR
SOURCE SELECT
DIMMER ON
MONO MONITOR
MONITOR ON MAS-
TER FADER
EFFECT BYPASS
RACK 5–8
CURRENT PAGE
TAP TEMPO
RACK 5–8
MUTE MASTER
MUTE GROUP 1–8
PEAK HOLD ON
METER
STEREO/MONO(C)
SEL
PARAMETER 2
LED
—
Dark
—
—
SCENE +1, LIST UP
Flash
SCENE -1, LIST DOWN
—
—
SCENE #000–#300
Lit if UNDO is possi-
—
ble
Lit if UNDO is possi-
—
ble
LATCH
ON: lit, OFF: dark
UNLATCH
ON: lit, OFF: dark
Lit if assignment is
—
the same
—
ON: lit, OFF: dark
Lit if assignment is
—
the same
—
Flash
—
ON: lit, OFF: dark
Lit if assignment is
—
the same
STEREO L/R,
MONO(C), LCR, 2TR
Lit if the selected
IN L/R, INPUT 15/16
monitor source is on
{31/32}, PLAYBACK
OUT, DEFINE
—
ON: lit, OFF: dark
—
ON: lit, OFF: dark
—
ON: lit, OFF: dark
—
ON: lit, OFF: dark
—
Blink in synchroniza-
tion to the tempo
—
—
ON: lit, OFF: dark
—
ON: lit, OFF: dark
MONO (C): lit, STE-
—
REO: dark
Functions that can be assigned to user-defined keys
Explanation
No assignment
Recall the currently selected scene
Store to the currently selected scene
SCENE +1 selects the next scene number. LIST UP scrolls
the scene list upward by one. Simultaneously pressing
[SCENE ▲] and [SCENE ▼] keys will return to the current
scene number. After scene 300, wrap around to scene
000.
SCENE -1 selects the previous scene number. LIST UP
scrolls the scene list upward by one. Simultaneously press-
ing [SCENE ▲] and [SCENE ▼] keys will return to the cur-
rent scene number. After scene 000, wrap around to scene
300.
Recall the scene of the next existing number
Recall the scene of the previous existing number
Directly recall the scene of the specified number
Execute RECALL UNDO
Execute STORE UNDO
Switch TALKBACK on/off
Turn TALKBACK on while pressed
When you press this key, the previously-stored assignment
state will be applied. While holding down this key, press a
SEL key of an output channel to switch the assignment on/
off, and its state will be remembered. During this time, the
[SEL] LED will be lit if assign is ON, or dark if OFF.
Switch the OSC on/off
When this turns on, the OSC popup window will appear
When you press this key, the previously-stored assignment
state will be applied. While holding down this key, press a
SEL key of an output channel to switch the assignment on/
off, and its state will be remembered. During this time, the
[SEL] LED will be lit if assign is ON, or dark if OFF.
Clear all CUE settings together
Switch MONITOR on/off
When you press this key, the previously-stored assignment
state will be applied. While holding down this key, press a
SEL key of a MIX or MATRIX channel to switch the assign-
ment on/off, and its state will be remembered. During this
time, the [SEL] LED will be lit if assign is ON, or dark if OFF.
Recall the selected signal to the monitor
Switch the monitor dimmer function on/off
Switch MONO MONITOR on/off
If this is on, you can use the master fader to control the
monitor level, and the ON key to switch the monitor out-
put on/off
Bypass the specified effect
Use the tap tempo function in the displayed screen
Use the tap tempo function for the specified effect
Switch MUTE GROUP MASTER on/off
Turn the meter PEAK HOLD function on/off
Switch the top panel STEREO L/R METER function
LS9-16/32 Owner's Manual
257