Yamaha 007POTO-G0 Owner's Manual page 240

Effects Parameters
■ DELAY+ER.
One input, two output delay and early reflections effects in
parallel.
Parameter Range
DELAY L 0.0–1000.0 ms
DELAY R 0.0–1000.0 ms
FB. DLY 0.0–1000.0 ms
FB. GAIN –99 to +99%
HI. RATIO 0.1–1.0
DLY/ER 0–100%
THRU, 21.2 Hz–
HPF
8.00 kHz
50.0 Hz–16.0 kHz,
LPF
THRU
S-Hall, L-Hall, Ran-
TYPE dom, Revers, Plate,
Spring
ROOMSIZE 0.1–20.0
LIVENESS 0–10
INI. DLY 0.0–500.0 ms
DIFF. 0–10
DENSITY 0–100%
ER NUM. 1–19
SYNC OFF/ON
NOTE L *1
NOTE R
*1
NOTE FB
*1
*1.
(Maximum value depends on the tempo setting)
240
LS9-16/32 Owner's Manual
Description
Left channel delay time
Right channel delay time
Feedback delay time
Feedback gain (plus values for
normal-phase feedback, minus
values for reverse-phase feedback)
High-frequency feedback ratio
Delay and early reflections bal-
ance (0% = all delay, 100% = all
early reflections)
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Type of early reflection simulation
Reflection spacing
Early reflections decay characteris-
tics (0 = dead, 10 = live)
Initial delay before reverb begins
Spread
Reverb density
Number of early reflections
Tempo parameter sync on/off
Used in conjunction with TEMPO
to determine left channel DELAY L
Used in conjunction with TEMPO
to determine right channel DELAY
R
Used in conjunction with TEMPO
to determine FB. DLY
■ DELAY→ER.
One input, two output delay and early reflections effects in
series.
Parameter Range
DELAY L 0.0–1000.0 ms Left channel delay time
DELAY R 0.0–1000.0 ms Right channel delay time
FB. DLY 0.0–1000.0 ms Feedback delay time
Feedback gain (plus values for
FB. GAIN –99 to +99% normal-phase feedback, minus
values for reverse-phase feedback)
HI. RATIO 0.1–1.0 High-frequency feedback ratio
Delay and early reflected delay
DLY.BAL 0–100% balance (0% = all early reflected
delay, 100% = all delay)
THRU, 21.2 Hz–
HPF High-pass filter cutoff frequency
8.00 kHz
50.0 Hz–16.0 kHz,
LPF Low-pass filter cutoff frequency
THRU
S-Hall, L-Hall, Ran-
TYPE dom, Revers, Plate, Type of early reflection simulation
Spring
ROOMSIZE 0.1–20.0 Reflection spacing
Early reflections decay characteris-
LIVENESS 0–10
tics (0 = dead, 10 = live)
INI. DLY 0.0–500.0 ms Initial delay before reverb begins
DIFF. 0–10 Spread
DENSITY 0–100% Reverb density
ER NUM. 1–19 Number of early reflections
SYNC OFF/ON Tempo parameter sync on/off
Used in conjunction with TEMPO
NOTE L *1
to determine left channel DELAY L
Used in conjunction with TEMPO
NOTE R to determine right channel DELAY
*1
R
Used in conjunction with TEMPO
NOTE FB
*1
to determine FB. DLY
*1.
(Maximum value depends on the tempo setting)
Description