When Connecting Via Lan: Static Ip Address Setting - Brother GTX pro Instruction Manual

4-3-3. When connecting via LAN: Static IP address setting

When connecting via LAN, Printer static IP address needs to be obtained beforehand. There are two ways to set a static
IP address for the printer: from the PC and from the printer. For information on the setting from the printer, see Chapter 8.
☞"8-17. Static IP address setting >>P.238"
<TIPS>

If the PC cannot recognize the Printer, a correct static IP address might not be assigned. ☞"4-3-4. When connecting via LAN:
Adding a printer to PC >>P.52"
Consult your administrator.
(1) With the printer powered on, make a connection with a USB 2.0 cable between the printer and your PC.
<TIPS>

For this connection of the USB cable, secure it in place by means of the cable clamp as required.
(2) From [All Programs] in the Start menu, select the "GTX pro Maintenance" from "Brother GTX pro Tools".
(3) After the window shown below appears, select the [IP Address Set] and click [Next].
48
Installation and preparation