Bottom View Of Platen - Brother GTX pro Instruction Manual

2-5. Bottom view of platen

No. Name
1 Platen fixing lever
2 Platen positioning plate
3 Platen height adjustment lever
4 Knob
5 Platen bearing
6 Collars
7 Spacer
3
5
6
7
4
Use this lever to secure the platen in place.
Tighten or loosen it to adjust the height of the platen when attaching/removing
the platen. Keep it tightened when printing.
This is used to secure the platen at the fixed direction and hold it in place.
This lever should be used to adjust the platen's height.
Use this knob to secure the platen bearing in place. This lever should be used
to change the platen's height. Keep it tightened when printing.
This is used to secure and hold the platen in place.
Used to change the platen's height by changing the number.
Platen height of each machine is finely adjusted by the number of the spacer.
Never tamper with or remove these spacers even if adjusting the collars or it
will affect print output.
Name and function of each component
Function
28
2
1
X0255