Brother GTX pro Instruction Manual page 343

Error code Error message
5802 [Machine Error]
5803 [Machine Error]
5804 [Machine Error]
[Obstacle on the
6004
Platen]
6010 [PC Data Error]
6011 [Machine Error]
6012 [Machine Error]
Description
Check to see if there is any
source near the printer that
It is the produces a loud noise.
communication error If a USB flash memory is inserted
between the main into the printer, remove the
board and the panel memory first, and then restart the
board or the head printer.
board. If the problem still persists even
after restarting the printer, please
contact your dealer.
Check to see if there is any
source near the printer that
It is the produces a loud noise.
communication error If a USB flash memory is inserted
between the main into the printer, remove the
board and the panel memory first, and then restart the
board or the head printer.
board. If the problem still persists even
after restarting the printer, please
contact your dealer.
Check to see if there is any
source near the printer that
It is the produces a loud noise.
communication error If a USB flash memory is inserted
between the main into the printer, remove the
board and the panel memory first, and then restart the
board or the head printer.
board. If the problem still persists even
after restarting the printer, please
contact your dealer.
Check to see if the obstacle
sensor is covered with something.
It indicates some error
If the problem still persists even
in the obstacle sensor.
after restarting the printer, please
contact your dealer.
The system failed to Make note of their error code and
write the EEPROM of error message, and please notify
the main board. it to your dealer.
The system failed to
Make note of the error code and
erase the FLASH
error message, and please notify
ROM of the main
it to your dealer.
board.
The system failed to Make note of the error code and
write the FLASH ROM error message, and please notify
of the main board. it to your dealer.
343
Remedy
-
-
-
-
-
-
-
Error message
Reference