Brother GTX pro Instruction Manual page 249

The power cannot be turned on
Probable Cause
Is the power cord connected to
the printer?
Is the front cover closed firmly?
An error occurs immediately after activating the printer
Probable Cause
Is any error message displayed?
No print data can be loaded from USB flash memory
Probable Cause
Has the USB flash memory been
inserted into its insertion slot
properly?
Is the applicable file ARP or AR3
file?
Is your USB flash memory suited
to required conditions?
Has your USB flash memory
been broken?
Neither uni-directional printing nor bi-directional printing can be performed
Probable Cause
Do the settings of printer driver
and printer agree with each
other?
Remedy
Make sure that the power cord is connected to the
printer.
Close the front cover properly.
Remedy
Check the content of the error, and restart the printer.
If the error is still not eliminated, please contact your
dealer or Brother.
Remedy
Insert the USB flash memory into the insertion slot
firmly.
This printer cannot print out the print data of
GT-541/GT-782/GT-3. Recreate the print data.
Please use a FAT32-formatted USB flash memory of
which storage capacity ranges from 2 GB to 32 GB.
You cannot use a USB memory with security functions
such as password lock or beyond 32 GB.
Check to see if it functions properly using your PC or
the like.
Remedy
Note that the setting of the printer's setting has priority
over the setting of printer driver. The printer driver's
setup value takes effect only if the printer's setting is
[Auto].
249
Troubleshooting
Reference
-
-
Reference
"10. Error message
>>P.311"
Reference
-
-
-
-
Reference
"8-1. Setting the print
direction >>P.229"