Brother GTX pro Instruction Manual page 47

(6) Adjust the carriage speed. Then adjust the printer using "GTX pro Maintenance".
Menu name
1 [CR Speed Adjustment]
[Initial settings after head
2
replacement]
3 [Firing Adjustment]
[Platen-Rolling Adjustment]
4
5 [White/Color Alignment]
What to do in the White Ink Pause Mode
For the White ink pause mode, perform the following steps using the maintenance tool.
1 [CR Speed Adjustment]
2 [Initial settings after head replacement]
3 [Firing Adjustment]
4 [Platen-rolling adjustment]
5 [White/Color Alignment]
6 [Setting of the time displayed on the nozzle check pattern]
Things to prepare
―
―
Black paper or transparent sheet
(such as OHP sheet)
White paper
White paper
Black paper or pretreated black or
dark color T-shirt
Menu name
47
Installation and preparation
See the operating procedure with
GTX pro Maintenance
"7-4-1. CR (Carriage) speed
adjustment >>P.216"
"7-4-2. Initial settings after head
replacement >>P.217"
"7-4-3. Firing adjustment >>P.218"
"7-4-4. Platen-rolling adjustment
>>P.219"
"7-4-5. White/color alignment
>>P.220"
When in White Ink Pause Mode
Performed
Performed for color head only
Upon completion of color head
setting, click [Cancel] to close the
maintenance tool once and then start
it. Then proceed to the following
steps.
Performed for color head only
Upon completion of color head
setting, click [Cancel] to close the
maintenance tool once and then start
it. Then proceed to the following
steps.
Performed
Not required
Performed